 |  |
|
|
|
|
Downloads
 |
-HH100UDG
STANDARD FEATURES
- Electric Motor: 460/575 volt, Nema T-frame, C-face, open drip proof squirrel cage induction type.
- Motor Starter: 460 volt (75-100 H.P.), full voltage magnetic starter with 110 volt controls, Nema-1 enclosure, UL, ETL listed and three phase overload with external reset and phase protection. Control circuit breaker protection. Other voltages available. Cooling fan protected by overload relay.
- Separator Tank: ASME coded 200 PSIG tank, relief valve, minimum pressure/check valve, high efficiency replaceable oil separator element with steel braded discharge pipe.
- Fluid Fill & Level Elbow: One piece fluid fill elbow and level sight glass. Vented cap for pressure release when filling.
- Protective Devices: Class 20 overload relay, high air temperature, high discharge temperature, high pressure shutdown switches and anti-restart pressure switch, preventing starting while air compressor is pressurized. Anti-reversing control standard.
- Cooling System: Cooling system with fan motor. Large side by side oil cooler/aftercooler for easy cleaning. Updraft design allows hot air to be discharged readily.
- HD Air Intake Filter:
Oversized dry type, single stage with replaceable element
Inlet Valve: One piece housing for dependable performance and full modulation.
- Coupling & Drive: Compressor is flange mounted to motor C-face for positive alignment and direct driven by zero maintenance coupling.
- Controls: Full modulation, solenoid controlled for smooth lowest possible no load power. Automatic start/stop or constant speed. Timed dual control.
- Air Cooled Aftercooler: Double pass air-cooled aftercooler with thermostatic control for maintaining the appropriate oil operating temperature and reducing the discharge air temperature to within 15 degrees of ambient.
- Auto/Dual Control: Compressor control that allows the unit to be operated in continuous run mode or with an automatic timed shut down. Auto control allows multiple machines to be operated in a lead-lag condition.
- Microprocessor Control.
- Oil Filter: Spin on type mounted strategically for ease of maintenance and streamlined tubing.
| Type Name | Industrial Air Compressors |
| Capacity, ACFM: | 325 |
| Maximum Full Load(psiq): | 170/180 |
| Minimum Full Load(psig): | 60 |
| Motor Horsepower: | 100 |
| Motor Speed(RPM): | 1775 |
| BHP @ 100 psig | 74 |
| BHP @ full load | 104 |
| Driver rotor coupling: | Direct |
| Options: | Air Filter - Pop Up Indicator
|Dryer - EM Monitor
|Auto Restart
|Enclosure
|HATD Shutdown Switch
|Inlet Modulation Control
|Maintenance Kit
|Microprocessor Control with Redundancy
|Receiver 240 Gallon Vertical
|Receiver 400 Gall |
|
|
|
|
|
© 2010 Copyright Sullivan-Palatek, Inc.
1201 West US Highway 20, Michigan City IN 46360
All Rights Reserved
Designed and Hosted by Datamine.net
|
|  | |
