| Sullivan-Palatek |

Financing USA Financing Canada

Industrial Division Portable Division

Industrial Division

Downloads

-50UD

STANDARD FEATURES
Electric Motor: 460/575 volt, Nema T-frame, C-face, open drip proof squirrel cage induction type.
Motor Starter: 460 volt (40-60 H.P.), full voltage magnetic starter with 110 volt controls, Nema-1 enclosure, ETL listed and three phase overload with external reset and phase protection. Control circuit breaker protection. Other voltages available. Cooling fan protected by overload relay.
Separator Tank: ASME coded 200 PSIG tank, relief valve, minimum pressure/check valve, high efficiency replaceable oil separator element.
Fluid Fill & Level Elbow: One piece fluid fill elbow and level sight glass. Vented cap for pressure release when filling.
Protective Devices: Class 20 overload relay, high temperature and over pressure shutdown switches, and anti-restart pressure switch preventing starting while air compressor is pressurized. Anti-reversing control standard.
Cooling System: Cooling system with own motor. Large side by side oil cooler/aftercooler. Updraft for maximum efficiency. Easy cleaning.
HD Air Intake Filter: Oversized dry type, single stage with replaceable elementInlet Valve: One piece housing for dependable performance and full modulation.
Coupling & Drive: Compressor is flange mounted to motor C-face for positive alignment and direct driven by zero maintenance coupling.
Controls: Full modulation, solenoid controlled for smooth lowest possible no load power. Automatic start/stop or constant speed. Timed dual control.
Instrumentation: Line pressure gauge, discharge pressure gauge, hour meter, temperature gauge, oil filter and separator element differential gauges.
Auto/Dual Control: Compressor control that allows the unit to be operated in continuous run mode or with an automatic timed shut down. Auto control allows multiple machines to be operated in a lead-lag condition.

Microprocessor Control.
Air Cooled Aftercooler: Double pass air-cooled aftercooler with thermostatic control for maintaining the appropriate oil operating temperature and reducing the discharge air temperature to within 15 degrees of ambient.

Oil Filter: Spin on type mounted direct to compressor unit for ease of maintenance and streamlined tubing.

Type Name	Industrial Air Compressors
Capacity, ACFM:	210
Maximum Full Load(psiq):	120/130
Minimum Full Load(psig):	60
Motor Horsepower:	50
Motor Speed(RPM):	3550
BHP @ 100 psig	46.5
BHP @ full load	51
Driver rotor coupling:	Direct
Options:	Air Filter - Pop Up Indicator \|Auto Restart \|HATD Shutdown Switch \|Inlet Modulation Control \|Enclosure \|Maintenance Kit \|Microprocessor Control with Redundancy \|Sequencer \|Receiver 400 Gallon Vertical \|Receiver 240 Gallon Vertic